Concrete Contractor in Riverside, CA - Driveways and Patios Built on Solid Base
Bedrock Moreno Valley Concrete Company is a concrete contractor based in Moreno Valley. We pour driveways, patios, walkways, walls and slabs for homes across Riverside, and the ground prep gets done before any concrete shows up.
Concrete work for Riverside homes
Riverside sits right next to us in Moreno Valley, and it's a big city with every kind of house, from older homes still on their first driveway to newer ones where the owners want a patio or a wider drive. A lot of what we pour here is flatwork, the driveways, patios, walks and steps that lie on the ground, along with walls and slabs for additions. It's the same work we do up in San Bernardino and back home in Moreno Valley, but every Riverside lot gets looked at on its own.
When the old concrete comes out on an older Riverside lot, we usually find out why it failed, whether that's a thin base, roots or a slab tipped toward the house. That's why I plan the digging, the base and the drainage before we talk about finish, since the base is the one thing you can't fix later.
What we pour in Riverside
When an older Riverside driveway has cracked and sunk at the street, we tear it out, dig down to firm ground, pack a new base and pour.
A lot of Riverside patio calls are for a plain back slab, and we set it to fall away from the house so rain runs off instead of pooling.
Stamped concrete gives a Riverside patio or entry the look of stone or brick, poured over the same packed base we'd put under any plain slab.
Walks lifted by roots or sunk into a trip edge are common on older Riverside lots, so we replace them on a packed base with cut joints.
If your Riverside garage floor is cracked, dusty or sloped wrong, we can break it out and pour a new slab that drains toward the door.
Color, exposed stone and saw-cut patterns are options for Riverside homeowners who want more than gray, and we talk through upkeep before you pick one.
Riverside yards that step up or down need walls that hold soil back, so we size the footing and the drainage behind the wall before we form it.
For shops, additions and outbuildings in Riverside, we pour interior concrete floors flat and finished smooth, ready for the use you've got planned.
A deck around a Riverside backyard pool takes wet feet and splashing every day, so we give it a textured finish and a slope that sheds water.
Front and back steps on older Riverside homes often crack or pull away from the house, and we rebuild them with even risers and steel inside.
Adding a garage, a room or a backyard unit in Riverside starts with a slab foundation, and we form and pour it to the approved plans.
For new structures on a Riverside lot, our foundation work covers the digging, forms, steel and pour, planned around the soil we find once we dig.
Small property owners in Riverside call us for parking lots and lot repairs, with a thicker slab and base built for cars turning all day.
Footings carry the weight of walls, posts and additions, so on Riverside jobs we dig them to firm soil and set the steel before any concrete goes in.
When a Riverside slab or foundation has settled and doors start sticking, we look at why it moved before we talk about raising it.
We saw-cut concrete in Riverside for new doorways, plumbing trenches, or to take out a bad section of driveway without breaking up the rest.
What Riverside lots ask of new concrete
You get straight answers before the pour, including the ones you'd rather not hear, and a slab planned from the ground up instead of rushed.
Base dug out, not raked
We dig to the subgrade, the ground the slab rests on, and pack the base, since loose dirt settles.
Drainage checked before forming
We check where water runs on your lot first, so the new slab falls away from the house.
Control joints cut on time
Concrete cracks, so we cut control joints, planned grooves that tell a crack where to go, before it picks its own spot.
Owner on site for pours
I look at every job first and run each pour, and our crew handles the forming, placing and finishing.
Paperwork handled, fully insured
We're licensed and fully insured, and when a job needs a city permit we handle the application and inspections.
Riverside concrete questions
Do I need a permit to pour a concrete driveway or patio in Riverside?
Riverside requires a building permit for most construction, and driveways and patios aren't on the city's list of exempt work, so check with the city before you pour. That exempt list only names finish jobs like painting, tiling, carpet and cabinets, and the city's Building & Safety permits page is where to start for your job. If it needs a permit, we handle the application and line up the inspections.
Does a retaining wall need a permit in Riverside?
A retaining wall 4 feet tall or less needs no permit in Riverside, measured from the bottom of the footing to the top of the wall. That exemption ends if the wall holds back extra load, like a slope or a driveway above it, or holds back certain classes of liquid, and since the footing counts, a wall that looks short above ground can still be over. We'll measure it with you before we plan the wall, so you know which side of the line you're on.
How do I get a building permit for concrete work in Riverside?
You apply to the city's building official, and you can do it at the Permit Services counter in the One Stop Shop, where the permit can go to you as the owner, your authorized agent or a properly licensed contractor. Most applications get cleared by the Planning Division before Building & Safety reviews the plans, so a job that needs plan review usually takes longer than a permit handed over the same day at the counter. On our jobs we handle the application and set up the inspections, and I'll walk you through each step.
How long is a Riverside building permit good for?
A residential permit in Riverside goes invalid unless the work starts within 12 months of the day it's issued. That matters if you pull a permit now and plan to pour next year, so we set the schedule with the permit date in mind.
Does a concrete contractor from Moreno Valley need a Riverside business license?
It may, because any business doing business inside Riverside needs a valid City Business License, and an older city finance page says businesses outside the city limits may need one too. The city's Business License Division answers questions about it, and its business license page is the place to check current details. It's fair to ask any contractor you're weighing about it.
How much does a new concrete driveway cost in Riverside?
A Riverside driveway's price comes down to its size, whether an old slab has to be broken out and hauled off, how much digging and base the ground needs, and the finish you choose. Thickness and rebar, the steel bars that hold a cracked slab together, add to it, and a plain broom finish, the light texture that gives tires and shoes grip, costs less than stamped or colored work. If the budget needs trimming, trim the finish and not the base, because the base is hidden on day one and it decides whether the slab settles, and I'll give you your number once I've seen the ground.
Not on the list? Call us anyway
Pick your city below for its own page, or call (951) 518-9186 if yours isn't listed, since we work across the cities around Moreno Valley.
Ask about your Riverside concrete job
Call (951) 518-9186 or use our form, and we'll go over your project and what Riverside's permit steps look like for it.